FTA COOLSAT RCVR MANUAL MANUAL
FTA COOLSAT RCVR MANUAL UPGRADE

FTA COOLSAT RCVR MANUAL MANUAL

Manual and PID scans allow you select a TP to scan, and in the case of PID scan, which PIDвЂ™s to scan. Auto scanning will scan all transponders (TPвЂ™s) in memory. No extra work needed (I like no extra work). Once you have USALS in the rest is a snap. The unit controls the SG2100 motor very smoothly. Use the 1.2 and move it until the bar turns green. I am a little more than 4 degrees off with the DBS LNB. The 1.2 allows you to fine tune a satellite, which I used for the DBS satellites, since the LNB is to the right of the KU LNB, so if I go to 91 for ExpressVu, I am actually at 87ish. I can get from SBS6 to G10 in about 15-20 seconds, much faster than the Pansat would do it. I donвЂ™t know why it does, but the motor seems to move a lot faster with the Coolsat than the other 2 receivers IвЂ™ve used that can motor. I told the motor this is my 0 spot and saved. That ВЅ a degree can make a HUGE difference, so make sure you put in it right. I am at 93.5 longitude, but on my original unit, I put 93.0. I selected USALS and went in and put my latitude and longitude. I changed the LO frequency (to 10750) and added the DiseQc switch (I have a 2 way switch between the motor and the LNBвЂ™s). I went in and selected IA6, which is my true south. One note regardless of if itвЂ™s a fixed or motorized, you have to go into the fixed system first and get everything set up before you can go to the motorized. You can select a fixed dish or motorized. Press вЂњMenuвЂќ and go into the Dish Setup menu. Obviously, I selected English and away we go. When you first set up the unit, it asks for your language for the menus. I already had a motor from my previous setup, so I put that at my true south and hooked it to the Coolsat. I was happy because I can hook 2 VCRвЂ™s to it, without the use of a distribution box. There is an input for satellite, a loop out (to hook another receiver to it), antenna in, rf out, two sets of A/V outputs, a S-Video output and a coaxial output. The first thing I noticed about the unit is it has more inputs/outputs than any other FTA receiver IвЂ™ve seen. The Coolsat 4000 Pro is the newest model of the Coolsat line of free to air receivers, replacing the 4000 Plus.

FTA COOLSAT RCVR MANUAL UPGRADE

My main reason for an upgrade was I was sick of waiting 10 minutes to scan a satellite when I want to see the big game and wanted AC-3 audio for the PBS channels. I think I have found the answer in the Coolsat 4000 Pro.

IвЂ™ve been looking for a new FTA receiver to upgrade my free to air experience.

Fta coolsat rcvr manual